Español
العربية
Francés
Русский
Português
Italian
Türk
Bahasa Indonesia
ไทย
Electric Warehouse Forklift
Zero exhaust emissions, environmentally friendly and green, it can be fully operated indoors, improving the working environment and ensuring the health of employees.
The operating noise is significantly below 75 decibels, far lower than that of fuel vehicles, making it particularly suitable for noise-sensitive night or indoor working conditions.
The energy conversion efficiency exceeds 90%, and the energy consumption cost is only 20% to 30% of that of fuel forklifts, making it highly economical for long-term use.
There is no need to change engine oil, spark plugs, etc. Maintenance costs are significantly reduced by approximately 60%. Only basic checks and maintenance are required on a daily basis.
Equipped with an intelligent electronic control system, it features smooth start and stop, linear acceleration, and minimal vibration, significantly enhancing operational comfort and accuracy.
Today, in the pursuit of refined operation and sustainable development, 2.5t electric warehouse forklift, as the golden tonnage in the material handling field, poses higher requirements for its operation equipment. This 2.5t electric warehouse forklift of this category integrates cutting-edge technology, outstanding performance and humanized design. It is a strategic-level choice for you to enhance the efficiency of medium-duty operations and reduce the overall operating costs. The core of electric forklift is equipped with a lithium iron phosphate battery pack that offers both excellent stability and safety. This battery system not only inherently possesses excellent thermal stability, eliminating safety hazards from the root, but also has an extremely long cycle life, with standard cycle times reaching over 4,000, far exceeding that of ordinary batteries on the market. Combined with high-power permanent magnet synchronous drive motors, the energy efficiency conversion rate exceeds 95%, ensuring that the forklift can output powerful and stable power under all working conditions, achieving effortless heavy-load starting and climbing slopes.
Intelligent energy management and ultra-fast charging technology
The built-in intelligent battery management system (BMS) is like the "smart brain" of the forklift, providing 7x24-hour real-time and precise monitoring of the voltage, temperature and health status of each battery cell, achieving intelligent balancing and charge and discharge protection, and minimizing battery degradation to the greatest extent. Supporting high-current fast charging technology, it can be charged to over 80% in just one hour. It makes it easy to quickly recharge during short breaks at work, perfectly meeting the high-intensity operation requirements of multi-shift systems and achieving nearly 24-hour continuous operation.
Fully electronically controlled intelligent hydraulic and transmission system
Thanks to its advanced fully electronically controlled architecture, its hydraulic lifting system and walking control system respond extremely quickly and linearly. The lifting, lowering and tilting actions are smooth and precise, effectively preventing the goods from shaking. It is particularly suitable for the handling of precision instruments, glass products and other items with high stability requirements. The driving process starts and stops smoothly without the shock sensation of traditional mechanical transmission. It not only protects the safety of the goods but also significantly enhances the driver's confidence and comfort in handling.
Ergonomic seating space
Low pedals, suspended seats, adjustable steering wheels and multimedia handles integrating multiple functions jointly create a spacious and comfortable driving environment, significantly reducing fatigue from long hours of work and enhancing work efficiency.
Outstanding body and view design
The compact body layout results in a smaller turning radius, allowing it to move freely even in narrow shelf aisles. The optimized mast structure and the wide view window provide the operator with an excellent forward view, further ensuring operation safety.
Strong adaptability to working conditions
The protection grades of key electrical components all reach IP54 or above, effectively defending against dust and water splashes. It can operate stably and reliably in both clean indoor warehouses and humid workshop environments.
| Model | CPD25 | ||
| Rated Capacity | kg | 2500 | |
| Load Center | mm | 500 | |
| Power Type | Lithium Battery | ||
| Driving Type | Ride-on Type | ||
| Wheelbase | (L1) | mm | 1550 |
| Front Tread | (W2) | mm | 945 |
| Rear Tread | (W3) | mm | 880 |
| Front Overhang | (L2) | mm | 325 |
| Mast Tilting Angle (Forward-Backward) | ° | 5∕10 | |
| Max. Lifting Height | (H) | mm | 3000 |
| Free Lift Height | (H7) | mm | 105 |
| Overall Height (Mast Lowered) | (H1) | mm | 2200 |
| Overall Height (Mast Extended) | (H2) | mm | 4055 |
| Overhead Guard Height | (H3) | mm | 2110 |
| Overall Length (Including Fork) | mm | 3400 | |
| Overall Length (Without Fork) | mm | 2300 | |
| Overall Width | (W1) | mm | 1096 |
| Min. Ground Clearance | (H4) | mm | 88 |
| Min. Turning Radius | mm | 2220 | |
| Fork Dimensions (L×W×T) | mm | 1070*100*40 | |
| Max. Driving Speed (No-Load) | km/h | 14 | |
| Max. Driving Speed (Full-Load) | km/h | 12 | |
| Max.Lifting Speed(Full-Load/No-Load) | mm/s | 270∕300 | |
| Descending Speed (Full-Load / No-Load) | mm/s | 400∕350 | |
| Gradeability (Full-Load / No-Load) | (%) | 15∕20 | |
| Curb Weight | kg | 3200 | |
| Number of Wheels (X = Driving Wheels (Front/Rear)) | 2∕2 | ||
| Tire Type (Front/Rear) | Solid Tire | ||
| Tire Size (Front/Rear) | 6.5-10 16*6.8 | ||
| Driving Brake | Hydraulic-Foot Step Type | ||
| Parking Brake | Mechanical-Manual | ||
| Driving Motor Power (S2-60min) | kW | 6 | |
| Lifting Motor Power (S3-15%) | kW | 7.5 | |
| Driving Motor Control Mode | AC | ||
| Lifting Motor Control Mode | AC | ||
| Hydraulic System Pressure | MPa | 18 | |
| Battery Capacity | V/Ah | 76.8V/205Ah |
This category is an ideal solution for medium and short-distance, high-intensity, and environmentally demanding material handling tasks. It is particularly suitable for:
• Logistics distribution center: Achieve high efficiency in processes such as loading and unloading on platforms and shelving in warehouses.
• Electronics, pharmaceuticals, and food manufacturing industries: Its pollution-free and low-noise characteristics fully meet the requirements of clean workshops.
• Wholesale and retail industry warehouse: Achieve efficient and quiet goods turnover within a limited indoor space.
This 2.5t electric warehouse forklift is not merely a power replacement but a comprehensive technological upgrade. Through the innovative integration of high-performance batteries, intelligent electronic control and humanized design, it brings users an all-round value enhancement in terms of efficiency, economy and operation experience, and is a reliable partner for modern enterprises to achieve green and intelligent logistics.
